Category: Unidrive M
0.25 kW – 7.5 kW (0.33 hp – 10 hp)
200 V / 400 V
Unidrive HS30 is designed for applications that require cost effective integration into safety systems and incorporates dual Safe Torque Off and advanced Rotor Flux Control (RFC-A) of open loop induction motors.
Conform to safety standards, maximize uptime and reduce costs by integrating directly with safety systems
Improve throughput with advanced open-loop motor control algorithms
Flexible system integration with SI communications options
Install and configure quickly and easily
Key data
Standard features
Machine safety:
Keypad:
Option slots:
Parameter cloning via:
VOLTAGE RATINGS |
|
100 V (100 V - 120 V ± 10%) |
✓ |
200 V (200 V - 240 V ± 10%) |
✓ |
400 V (380 V - 480 V ± 10%) |
✓ |
575 V (500 V - 575 V ± 10%) |
✓ |
690 V (500 V - 690 V ± 10%) |
|
CONTROL MODE |
|
Open loop vector or V/Hz induction motor control |
✓ |
Open loop Rotor Flux Control for induction motors (RFC-A) |
✓ |
Open loop permanent magnet motor control (RFC-S) |
|
Closed loop Rotor Flux Control for induction motors (RFC-A) |
|
Closed loop permanent magnet motor control (RFC-S) |
|
Active Front End (AFE) power quality convertor |
FRAME SIZE |
DIMENSIONS (H X W X D) |
WEIGHT |
||
---|---|---|---|---|
mm |
in |
kg |
lb |
|
1 |
160 x 75 x 130
DIN rail mounting*
137 x 75 x 130
|
6.3 x 3.0 x 5.1
DIN rail mounting*
5.4 x 3.0 x 5.1
|
0.75 | 1.65 |
2 |
205 x 75 x 150
DIN rail mounting*
180 x 75 x 150
|
8.1 x 3.0 x 5.9
DIN rail mounting*
7.1 x 3.0 x 5.9
|
1.0 | 2.2 |
3 |
226 x 90 x 160 | 8.9 x 3.5 x 6.3 | 1.5 | 3.3 |
4 |
277 x 115 x 175 | 10.9 x 4.5 x 6.9 | 3.13 | 6.9 |
Keypad
|
Remote keypad All the features of the CI-Keypad LCD, but remote mountable. This allows flexible mounting on the outside of a panel and meets IP66 (NEMA 4) |
System Integration Modules - Communications
|
SI-PROFIBUS PROFIBUS interface module |
|
SI-DeviceNet DeviceNet interface module |
|
SI-CANopen CANopen interface module. |
|
SI-Ethernet External Ethernet module that supports EtherNet/IP and Modbus TCP/IP |
|
SI-EtherCAT |
SI-PROFINET RT PROFINET interface module |
System Integration Modules - Additional I/O
|
SI-I/O Extended I/O interface module to increase the number of I/O points on a drive |
Drive interface units - Back-up
|
AI-Back-up Adaptor Port adaptor for SD card parameter cloning, and an input for 24 V back-up |
AI-Smart Adaptor Has a built-in memory for parameter cloning, and an input for 24 V back-up |
Drive interface units - Communications
|
AI-485 Adaptor 24 V
Port adaptor that allows the drive to communicate via RS485. Includes an input for 24V
|
|
CT USB Comms Cable The USB Comms cable allows the drive to connect to a PC for use with Unidrive M's PC tools* |
* Also requires an adaptor.
Commissioning and monitoring software
|
Unidrive M Connect - Commissioning tool Based on Control Techniques’ 25 years' experience, Unidrive M Connect is our latest drive configuration tool for commissioning, optimizing and monitoring drive/system performance |
Automation and motion programming software
|
Machine Control Studio - Programming tool Control Techniques' Machine Control Studio provides a flexible and intuitive environment for programming Unidrive M’s new automation and motion control features. |
Please Leave Your Product Enquiry Here. We will Get Back To You Soon.