Danfoss VLT® AQUA Drive is dedicated to water and wastewater applications. With a wide range of powerful standard and optional features, the VLT® AQUA Drive provides the lowest overall cost of ownership for water and wastewater applications.
Features and benefits
200-240 V ..... 0.25 kW - 45 kW
380-480 V ..... 0.37 kW - 1000kW
525-600 V ..... 0.75 kW - 90 kW
525-690 V ..... 45 kW - 1,2 MW
IP20/chassis, IP21/NEMA 1,IP55/NEMA 12 and IP66/NEMA 4X
Dedicated water features Auto tuning of the PI controllers
With auto tuning of the PI controllers, the drive monitors how the system reacts on corrections made by the drive - and learns from it, so that precise and stable operation is achie ved quickly.
Pipe Fill Mode
Enables controlled (closed loop) filling of pipes. Prevents water hammering, bursting water pipes or blowing off sprinkler heads.
End of Pump Curve detects breaks and leakage
The feature detects breaks and leakage. End of curve triggers an alarm, shuts off the pump, or performs another userdefined action.
Dry Pump Protection lowers maintenance costs
The VLTÂ® AQUA Drive constantly evaluates the condition of the pump, based on internal frequency/power measurements.
Standard cascade controller
The in-built cascade controller controls up to three pumps with fixed lead pump.
This built-in logic controls alternation between two pumps in duty/stand-by applications. Motion of the stand-by pump prevents sticking of the pump. An internal timer assures equal usage of the pumps.
The flow compensation feature reduces the pressure set point according to the flow - which saves energy.
The initial ramp provides fast acceleration of pumps to minimum speed, from where the normal ramp takes over. This prevents damage on thrust and bearings. Sensorless Pressure or Flow Control
The VLT® AQUA Drive can optionally be delivered with the safe stop functionality suitable for category 3 installations according to EN 954-1. This feature prevents the drive from starting unintended
A wide selection of accessories is available for the VLTÂ® AQUA Drive to suit your needs. For further details see the Operation Instructions.
Options for bus communication, user programs, etc., are delivered ready for plug and play.
Local Control Panel LCP (graphical and numerical)
Cable for LCP, 9.8 ft. [3 m]
Remote-mounting kit for Local Control Panel (LCP)
External 24 V supply card
Serial Communication Options
Profibus Option Card (MCA-101)
DeviceNet Option Card (MCA-104)
Ethernet IP (MCA-121)
General Purpose I/O (MCB 101)
Relay Option (MCB 105)
Extended cascade option (MCO-101)
Advanced cascade option (MCO-102)
Analogue input option (MCB109)
External 24VDC supply option (MCB-107)
Harmonic Filter (AHF 005/010 MCE)
Sine-Wave Filters (MCC 101)
dU/dt filter (MCC 102)
USB connection cable to PC
Harmonic Filter cable to PC
Please Leave Your Product Enquiry Here. We will Get Back To You Soon.